Ozonation

For more detailed instructions, see our operating instructions.

Before ozonation


SynergyClean

  1. Set Rüppell on the floor in dust free surface.
  2. Plug the power cord.
  3. Select “SynergyClean”.
  4. Set the area of the space (Set Area) (m2). .
  5. Set the height of the space (Set Height) (m).
  6. Rüppell shows the total ozonation time. After total time it is safe to go to ozonated space.
  7. It is optional to use the delay (Delay).
  8. Exit space during ozonization!

Timer (Timer)

  1. Set Rüppell on the floor in dust free surface.
  2. Plug the power cord.
  3. Select “Timer”.
  4. Set the timer for 0-15 minutes.
  5. It is optional to use delay (Delay).
  6. Exit space during ozonization! Remember to ventilate ozonated space properly!

How to use delay (Delay) function

  1. Select Timer or SynergyClean.
  2. Select 0-15 minutes for the delay.
  3. Ozonation will start after the delay.
  4. It is good to use a delay if it is desired to initiate simultaneous ozonization or if ozonating with multiple Rüppell ozonators.